Thread: MSSA Storage rules

Hi All,

Is there an MSSA storage regulation code online?

if not can someone please spell it out? in particular specifics around mounting the safe?

thanks

Your AO will supply you with a booklet outlining what you have to do

Beavis its sunday and i understand the point of firm surface fixtures but im a little worried about fixing to studs i believe suffice but they may deem not robhust enough? i have all the gear, ready to rumble just having second thoughts as i have not been through the motion

Originally Posted by rogers.270

Hi All,

Is there an MSSA storage regulation code online?

if not can someone please spell it out? in particular specifics around mounting the safe?

thanks

Check out the other thread.

http://www.nzhuntingandshooting.co.n...irements-8078/

http://www.police.govt.nz/sites/defa...nts-pol67n.pdf

Rogers270

As commented above.

Installation must be approved by a member of the Police.

Talk to your AOS ....... They are who you have to satisfy.

But Basically if using a Safe.

Minimum 6mm steel safe with anti pry features fitted to the door and fitted with at least two 6 lever mortise locks fixed with at least two 10mm bolts/coach screws into the wall studs and two 10mm dyna-bolts into concrete floor or 10mm coach screws or bolts into wooden floor joists.

If bolting to a wooden floor then you must also install a 6mm steel plate of sufficient size to prevent the safe from being cut out under the floor as well.

Cheers
Pete

we don't have a ao anymore in Nelson so its a pig and a poke who you get.
been in new place 8months still haven't had security check.

yeah we have an AO on his way in and will present to our NZDA club in a fortnight. they are doing my check this week (earlier than expected) however was a little confused as to requirements.

due to the swift nature this weekend was only time i had to finish installation

P38 the info you have provided is brilliant, this will work a treat

thanks

Originally Posted by rogers.270

yeah we have an AO on his way in and will present to our NZDA club in a fortnight. they are doing my check this week (earlier than expected) however was a little confused as to requirements.

due to the swift nature this weekend was only time i had to finish installation

P38 the info you have provided is brilliant, this will work a treat

thanks

can i have a reminder tx please.

Might have to join the NZDA, starting to get expensive,
NZPA, Clay bird group and now NZDA, do they accept any old learner hunter like me??

Originally Posted by mikee

Might have to join the NZDA, starting to get expensive,
NZPA, Clay bird group and now NZDA, do they accept any old learner hunter like me??

Can't see why not Mikee

They accepted me so they probably can't have very high standards to maintain

cheers
Pete