Couple from today, unfortunately no photo of my cruiser getting dropped off by the tow truck @chric1
Couple from today, unfortunately no photo of my cruiser getting dropped off by the tow truck @chric1
Fuck me. No wonder you won't be there tomorrow
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.
What more do we need? If we are above ground and breathing the rest is up to us!
Rule 1: Treat every firearm as loaded
Rule 2: Always point firearms in a safe direction
Rule 3: Load a firearm only when ready to fire
Rule 4: Identify your target beyond all doubt
Rule 5: Check your firing zone
Rule 6: Store firearms and ammunition safely
Rule 7: Avoid alcohol and drugs when handling firearms
Should have bought a Landrover! At least you'd be better mentally prepared
Boom, cough,cough,cough
Or trade it in on a Landrover? There's a nice tank on tard me c/w long range gun!
Boom, cough,cough,cough
Yep at Least you learnt with a cheap cv instead of a front diff !
Why didn't you pull the cv and front drive shaft and drive home ?
Sent from my GT-S5360T using Tapatalk 2
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
[ATTACH=CONFIG]27942[/ATTAC.
"Thats not a knife, this is a knife"
Rule 2: Always point firearms in a safe direction
CFD
tps://www.timeanddate.com/countdown/generic?iso=20180505T00&p0=264&msg=Dundees+Countdo wn+to+Gamebird+Season+2018&font=cursive
New gravel on the road should be interesting the next few weeks
"Thats not a knife, this is a knife"
Rule 2: Always point firearms in a safe direction
CFD
tps://www.timeanddate.com/countdown/generic?iso=20180505T00&p0=264&msg=Dundees+Countdo wn+to+Gamebird+Season+2018&font=cursive
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
Correct, first inspection looks like those 54mm nuts that tighten and hold the bearings and hub on have stripped themselves leaving nothing but the cv supporting the weight of the wheel via the drive hub which then snapped the cv at the wheel end of the cv like a carrot.
So at the moment wheel is only supported by the way the hub assembly keys in by 20mm and the rotor and caliper are the only things stopping it from coming out.
Will take some photos for you when I pull it apart today.
When it first happened we thought it was just the cv and had to drive it through some real shit stuff to get back. Hopefully that didn't cause too much extra damage.
Oh nasty.
Sent from my GT-S5360T using Tapatalk 2
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
Yeah not ideal
Hoping new cv, bearings and this http://www.trademe.co.nz/Browse/List...x?id=764244336 is all it needs. Fingers crossed the spindle is all good
Bookmarks