Thread: 300wm 200grain ELDX with a Burris eliminator 5 set up help

Hey I was wondering if anyone could help me out with some information on this round and or programming a Burris eliminator 5 set up with this round, I’ve got a tika t3x 24inch barrel 300wm with a Burris eliminator 5 on it and I have added in the factory BC and muzzle fps off the box and I’m getting roughly a 6 inch drop at 360m (the longest range I have access too currently) I was wondering although it’s a long shot if anyone has this set up and crunched the numbers with a chronograph and could set me on the right path with programming the scope or if anyone has the bc and Crono numbers off running this round out of a 24 inch tika t3x? Any help is appreciated

Every shooters different I can look up the litz bc for you but you’ll need to validate or get your hands on a chrony to get accurate speed

That would be awesome mate, I’ll try get my hands on a crony

For longer ranges use the G7 BC .301

I’ve currently got the g7 bc 301 in the programming

You mean .301 right

Haha yes sorry .301

My Tikka T 3 when it was a 24 inch barrel got approx 2900 fps measured on a F1 Chrono.(200 gr ELDX) Recently I have bought a Garmin Chrono and the same load in the now suppressed 300 WM with a 22 inch barrel averages 2840 fps.
Can’t help you with the scope sorry.

Don't need a chrono.
Just put in box velocity. Shoot it at your longest distance then validate drops again box velocity. Change fps until drops match.
Then take it out to the longest distance you'll shoot and verify