Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26
Like Tree22Likes

Thread: Howa 1500 torque settings.

  1. #16
    Bus driver
    Join Date
    Sep 2015
    Location
    Porirua/Whangateau
    Posts
    3,495
    Yeah mate... great advice... seen it as high as 8 -10 inches depending on the ammo.. some rounds will climb faster in trajectory... I have a set of bore sight rounds... laser dots at 100 yds... bloody accurate


    Quote...A quick trick we use for sighting in is get it spot on centre at 25 metres (not a bigger distance) then when it is, check what it is at 100m (should hopefully be about 1 or 2 inches high but hopefully centred above the centre of the target) Then 2 inches high at 100m should be fairly close to dead centre at 200m.
    veitnamcam and Steve123 like this.
    It's not the mountain we conquer,but ourselves.....Sir Edmund Hillary

  2. #17
    Bus driver
    Join Date
    Sep 2015
    Location
    Porirua/Whangateau
    Posts
    3,495
    This is an interesting subject,with regards to the info being proffered here ,and never really thought much about...I have a new rifle with a new scope,all brand new stuff.Ive always put my picaninny rails,scope mounts/rings etc on myself.....Looked at the fine details of various manufacturers,some give torque settings some don’t......have decided from the advice of others here to buy the torque tool (they are cheap here)and do it the methodical way as opposed to the” No8 wire,she,ll be right”method.......no offense....
    It's not the mountain we conquer,but ourselves.....Sir Edmund Hillary

  3. #18
    Member
    Join Date
    Mar 2012
    Location
    Waikato
    Posts
    2,085
    Sorry to hear about that laminate stock @Flyblown. Was it coming back to the same zero each time you reassembled it ?

    I'd like to be able to take mine apart more often to clear out leaves water oil and stuff and perhaps a torque wrench would let me do that without rechecking by shooting each time.

  4. #19
    Member Flyblown's Avatar
    Join Date
    Feb 2018
    Location
    Waikato
    Posts
    3,339
    Once the laminate was compressed, and as it got worse, the rifle started to wander a bit. It wasn't that bad, but it was noticeable. It wasn't returning to battery properly, and I discovered after one long session flinging 180gr pills around that the bottom metal was slightly loose, and the top of the recoil lug was munched.

    Since I fixed it up, its been a tack driver.

    But the barrelled action is even better in the DPT chassis.
    Bagheera likes this.

  5. #20
    Member aetchell's Avatar
    Join Date
    Feb 2018
    Location
    Wellington
    Posts
    625
    Hmm
    I've got a Howa 1500 in 7-08 and had the same issue. Stock screws came loose. Common issue with howa + hogue stock?

    Sent from my EVA-L09 using Tapatalk
    Steve123 likes this.

  6. #21
    Member Flyblown's Avatar
    Join Date
    Feb 2018
    Location
    Waikato
    Posts
    3,339
    Nope. They just need to be done up tight enough in the first place.
    Howa270 likes this.

  7. #22
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    What type of stock do you have on this rifle @Howa270
    Here is the torque settings from Nathan Fosters book “The Practical Guide To Bolt Action Rifle Accurizing and Maintenance”
    A good read and reference.
    Name:  CB21D84F-FD66-44AE-BB8A-5F5A9F27A749.jpeg
Views: 979
Size:  1.76 MB
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

  8. #23
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    Here’s the next pageName:  0EE0BE31-3E14-4039-9DB3-D360B0F77981.jpeg
Views: 911
Size:  1.71 MB
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

  9. #24
    Member Flyblown's Avatar
    Join Date
    Feb 2018
    Location
    Waikato
    Posts
    3,339
    The problem with Mr Foster’s numbers @Sideshow is that he doesn’t necessarily account for the material that the bottom metal is made from. For example a Tikka T3 is plastic with metal washers and I can attest to the fact that the plastic deforms well before you reach some of his recommended numbers. And in the case of the Howa the bottom metal is made from a relatively soft alloy and that also deforms and pushes into the bolt hole.

    I have raised this with the odd little community over at Ballistic Studies... good couple of years ago or more I will see if I can find it.

  10. #25
    Member
    Join Date
    Dec 2018
    Location
    South island.
    Posts
    59
    @Sideshow thanks for that, I have the houge stock so when I get a wrench I'll torque them to those numbers with some nail polish on the screws. I should only have to do it once or twice as I'm not planning to pull it apart very often.
    All I want to do is to turn deer, into poop.

  11. #26
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    Add a light coating of grease to the under side of the action and barrel.
    That should keep the rust away tile next year.
    But once you have your torque rench you can take it out of the if you feel it’s gotten too wet.
    I usual do it once a year unless it gets a heavy dose of rain.
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

 

 

Similar Threads

  1. Ruger m77 torque settings
    By rambo-6mmrem in forum Firearms, Optics and Accessories
    Replies: 7
    Last Post: 25-07-2018, 10:05 PM
  2. tikka optilock torque settings
    By bigbear in forum Firearms, Optics and Accessories
    Replies: 10
    Last Post: 14-02-2018, 01:02 AM
  3. torque Settings for scope rings and bases
    By rambo-6mmrem in forum Firearms, Optics and Accessories
    Replies: 15
    Last Post: 25-01-2018, 12:59 PM
  4. Stock torque settings
    By 223nut in forum Firearms, Optics and Accessories
    Replies: 13
    Last Post: 08-09-2017, 04:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!