Thread: Scope Dilemma, Ruger Precision

Millet , DET 34mm , High Matte , # DT00723 , thats the info on the packet , $90 here in NZ , I had a set of steel rings on order , basically $300 + gst , lucky I got saw these in Wanganui , and the steel rings where on back order still , cancelled them .

You may wnat to look at a set of Millet 34mm High , I have used them to mount a 4-16x50 PMII S&B , and theres a fair bit of room under the scope , so the 56mm lens will be close , and if its touching , just grind out the gap .

They cost me $90 and they where in NZ , nice .

Did some research last night, would have liked to have the new enhanced model, but the rifle is already in country. A new forend is an option. There are 34mm rings out there that will do the job, both 1 piece type mounts and traditional 2 piece rings, but most are very expensive. Checked out Weaver and they have a 6 hole Picatinny ring in X-high. Sent an email to them at 9pm and received a reply this morning with the appropriate heights. The X-high is high enough, so have now asked my gunshop if they can get a set. Failing that will check out some of the suggestions above, thanks guys.

SPUHR mounts are fantastic, worth every penny.

Have you considered a riser?

Originally Posted by 300_BLK

SPUHR mounts are fantastic, worth every penny.

Have you considered a riser?

Which mount have you got?

Originally Posted by MSL

Which mount have you got?

Spuhr - SP-4001 34 mm Tube

Mounted my S&B PMII 5-25x56 on the Remington 338 Lap Mag.

SOLID bit of kit.

Originally Posted by 300_BLK

Spuhr - SP-4001 34 mm Tube

Mounted my S&B PMII 5-25x56 on the Remington 338 Lap Mag.

SOLID bit of kit.

+ 1

I have two 20.7 moa ones on my XLR big 375s with NF ATACRs in them & another 30 mm one.

Originally Posted by Kiwi Greg

+ 1

I have two 20.7 moa ones on my XLR big 375s with NF ATACRs in them & another 30 mm one.

Thats some serious recoil Greg.

Spuhr mount is up to 500 rounds, no movement yet IIRC.

T2 helps dampen it though

Have you given the Burris P.E.P.R a go? Worked for me when my vortex rings were too low!


Sent from my iPhone using Tapatalk

Just a heads up,
I came across the exactly same problem today when i try to fit my Vortex PST with 50mm lens, i had a Vortex Match ring (well know as seekins) medium and it of course didn't fit, SO, i went to my local shop and even the high size Warne ring didn't fit, THEN, one of the guys who serve me there offer me a Vortex cant lever style mount, BOOM!!! It fit like a dream and even have 7 or 8mm of clearance.

I hope it help in the search for the "right ring".

Mac

Photos to come…

The beauty! "zero" shots!

Originally Posted by PERRISCICABA

Attachment 50234

The beauty! "zero" shots!

Creedmore? or a real calibre?

Originally Posted by 300_BLK

Creedmore? or a real calibre?

Creedmoor I already have a real caliber, 7mm Rem Mag. Lol

yeah ,

Phoenix Tactical UK , be aware they make 2 different lenght leg models , 1 ) For using from the top rail , like pictuered above , ie on a RPR or a AI AX type , and the other a bottom mounting unit like the Parker Hale type .

So if you are going to get one , make sure you order the right one .

Originally Posted by ChrisF

yeah ,

Phoenix Tactical UK , be aware they make 2 different lenght leg models , 1 ) For using from the top rail , like pictuered above , ie on a RPR or a AI AX type , and the other a bottom mounting unit like the Parker Hale type .

So if you are going to get one , make sure you order the right one .

I have ordered a top mount one, seems ideal for a 7mm08 ar10 build I'm collecting parts for



Sent from my iPhone using Tapatalk