A bit more progress and a lesson,Don't think you are an electrician
The original plan was to take the wiring up to a socket in the garage wall,(bathroom and garage on RCD)behind shower outlet(post 24)once the screed was done it became more obvious this would not work (thermostat pickup)post 30 shows draw wire.
So!,heated towel rail feed will do,trip RCD,try the hair dryer,nada! Dismantle heated towel rail,cover ends of wire with insulation tape,poke a small hole in wall,spend 1/2 hour catching draw wire,paint on waterproofing,clean up,turn on.""..no,hang on towel rail wires are taped,lightbulb,put the switch in minus towel rail sneaky,nastie,unseen biteies.
The FN towel rail is on the Kitchen lights FFS
That man deserves a DB
Bookmarks