Thread: Dream build

I'm running R22 in my 7mmsaum with 162 ELD X but mine is a 20" doing 2975 I tried 2217 and 2213 but R22 was better speed and lower pressure

Sent from my SM-G920I using Tapatalk

Thanks guys have a can of AR2217 so will start there.

Recommend charge weights @llewelyn

As always man different for each rifle.
But im running 68grains of 2217, fed 215mag primers and 150LRAB @300_BLK

Thats got some juice for a 20inch barrel @25/08IMP did 2213SC leave abit more room in the case and did u find it faster or slower than 2217

I only tried 2213 with the 150 ELD X and just couldn't get the speed I think there was plenty of case space. I also tried R19 speed was OK but high pressure again then tried R22 with good speed and pressure seemed ok.i was getting over 3k with it and the 162 but dropped it back for longer case life.

Sent from my SM-G920I using Tapatalk

Gunsmith is finished.

Back to me on Monday, can't wait!

Load development begins....

Suppressor recommendations?

Barrel is .920 inches at the muzzle and 5/8-24 thread

ODL?

Originally Posted by MSL

ODL?

Na. Pretty sure you meant OCD

Sent from my SM-G935F using Tapatalk

ODL ad would work according to bert

I'm looking forward to Monday and the pics

Rifle arrived today.

Very happy, immaculate work done by Desert Guns in Cromwell.

Mounted up the Sig Sauer Tango 6 5-30x56 mil/mil ffp. Unfortunately the 34mm Sig rings only come in one height which is far too high.

Might chase some Warne rings down, I have a THLR cheek-rest coming Friday to fix this.

Ladder loads for the 175 ELD-X all done.

Off to the range tomorrow with the LabRadar then will load up for this Saturday's Gunslinger Hunter shoot.

I will do my load testing with the 160 TMK and 162 ELD-X next week.

Only thing left on the rifle will be a cerakote job after this weekends shoot. Graphite black bolt and Tungsten everywhere else.

abit of topic but just wondering where you picked up that Sig Sauer scope? Looks great so far!

Nice one bro looks shit hot

Nice
Is that the sendero or sendero lite profile barrel?

Originally Posted by 300_BLK

Rifle arrived today.

Very happy, immaculate work done by Desert Guns in Cromwell.

Mounted up the Sig Sauer Tango 6 5-30x56 mil/mil ffp. Unfortunately the 34mm Sig rings only come in one height which is far too high.

Might chase some Warne rings down, I have a THLR cheek-rest coming Friday to fix this.

Ladder loads for the 175 ELD-X all done.

Off to the range tomorrow with the LabRadar then will load up for this Saturday's Gunslinger Hunter shoot.

I will do my load testing with the 160 TMK and 162 ELD-X next week.

Only thing left on the rifle will be a cerakote job after this weekends shoot. Graphite black bolt and Tungsten everywhere else.

Attachment 73853
Attachment 73854
Attachment 73855
Attachment 73856
Attachment 73857
Attachment 73858

Mate I've got some 34mm Warnes that would suit that down to a tee - PM the measurement you require and I can confirm the clearance on the set I have (unused) - $80 posted?