Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
Like Tree6Likes

Thread: Non corrosive flux for silver solder ?

  1. #1
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235

    Non corrosive flux for silver solder ?

    Can anyone advise where can buy non corrosive flux for low temperature silver solder ?

    Maybe someone on here who does electronics will be able to help.

    Working with GWS for a solution
    Also been in touch with Warburtons but theirs is in tiny containers for jewellery makers

    But hoping there is a better solution out there as I need about 1 Litre

  2. #2
    Member
    Join Date
    Oct 2014
    Posts
    51
    How low of a temp are we talking? I'm assuming somewhat lower than ezyflo. What are you joining?

    Sent from my INE-LX2 using Tapatalk

  3. #3
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    Quote Originally Posted by Davecbnz View Post
    How low of a temp are we talking? I'm assuming somewhat lower than ezyflo. What are you joining?

    Sent from my INE-LX2 using Tapatalk
    240 ºc

  4. #4
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    Quote Originally Posted by mimms2 View Post
    If your prcess is good there should be no trapped flux pockets to rust out. A solid rinsing, drying and oiling after.
    Cigweld do fluxes in half litre jars, any enginnering or welding shop should have.
    NB:all theory for me, my metal gluing skills is pretty average.
    Yes I know it can be cleaned up.
    But I'm laying double rifle top and bottom ribs so anything left is trapped in a void and could ultimately become a problem

    It would just be nice to have a non corrosive flux if available

  5. #5
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    i get mine from radio spares or element 14
    this stuff does silver solder very well:

    https://nz.rs-online.com/web/p/solder-pastes/0555232/

  6. #6
    Member
    Join Date
    Mar 2016
    Location
    Waikato
    Posts
    436
    Frank ford arsenal clean cast. Available from reloaders

  7. #7
    Member
    Join Date
    Jan 2018
    Location
    kaiapoi
    Posts
    7,124
    if you tin each surface before you start you wont have that issue. Then after they are cold enough to work, clamp them together and reheat until they are stuck. need good matching surfaces obviously.
    There will only be the solder in there and at the worst you could add some more in with your wire when its hot.
    Is this possible?
    Cordite likes this.

  8. #8
    Member
    Join Date
    Nov 2014
    Location
    Central Otago
    Posts
    2,266
    Do it the traditional English gunmakers way and use resin flux. Brownells do a high strength lead-free solder (silver/tin) called Force 44 that is perfect for the job. The surfaces are dressed clean and neat-fitting then fluxed and tinned, the assembly is wired and wedged tightly together, then the whole job is done in one hit in a big oven or muffle furnace. Laying the ribs is the last thing done after the barrels have been test-fired and regulated on a range. Regulation involves a rudimentary set of temporary sights and a soldered muzzle wedge which is adjusted as required to bring the two barrels to the same point of impact at the desired range. This is one of the jobs that makes double rifles so expensive! Spare a thought for the gunmakers that had to regulate the .600 Nitros!
    ishoot10s, Mauser308 and csmiffy like this.

  9. #9
    Member
    Join Date
    Jan 2018
    Location
    kaiapoi
    Posts
    7,124
    @mimms yup I get that. My interpretation was using flux while they are together after the question about the voids. If I misinterpreted that then my bad. If you flux it and tin them first there would be no voids

  10. #10
    Tread carefully in the suck... ishoot10s's Avatar
    Join Date
    May 2012
    Location
    NW of the true capital...
    Posts
    1,903
    Quote Originally Posted by gundoc View Post
    ...The surfaces are dressed clean and neat-fitting then fluxed and tinned, the assembly is wired and wedged tightly together, then the whole job is done in one hit in a big oven or muffle furnace. Laying the ribs is the last thing done after the barrels have been test-fired and regulated on a range. Regulation involves a rudimentary set of temporary sights and a soldered muzzle wedge which is adjusted as required to bring the two barrels to the same point of impact at the desired range. This is one of the jobs that makes double rifles so expensive! Spare a thought for the gunmakers that had to regulate the .600 Nitros!
    Just rewatched the Holland & Holland video on YouTube showing this exact process. Fantastic.
    10MRT shooters do it 60 times, in two directions and at two speeds.

  11. #11
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    Quote Originally Posted by ishoot10s View Post
    Just rewatched the Holland & Holland video on YouTube showing this exact process. Fantastic.
    I will start having a decent look on line this weekend
    It's been crazy busy and I haven't had a lot of time and mainly it hasn't bloody well rained for ages !
    At least when it rains I can have some screen time

  12. #12
    Member
    Join Date
    Mar 2017
    Location
    christchurch
    Posts
    167
    Hi in Christchurch I find the guy at weldworx pretty helpful and knowledgeable give him a call tomorrow if he dosen't have it he should be able to point to another supplier, or maybe DC cunnighams.

  13. #13
    Tread carefully in the suck... ishoot10s's Avatar
    Join Date
    May 2012
    Location
    NW of the true capital...
    Posts
    1,903
    Quote Originally Posted by akaroa1 View Post
    I will start having a decent look on line this weekend
    It's been crazy busy and I haven't had a lot of time and mainly it hasn't bloody well rained for ages !
    At least when it rains I can have some screen time
    Regulating at 10:00... https://youtu.be/qUXoNUzAyvk
    10MRT shooters do it 60 times, in two directions and at two speeds.

  14. #14
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    Brownells won't air freight flux or sent off shore

    And any way I would like to "Buy Local"

  15. #15
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992

 

 

Similar Threads

  1. Is Norinco 7.62x39mm ammo corrosive?
    By Wolfe in forum Firearms, Optics and Accessories
    Replies: 13
    Last Post: 30-12-2019, 09:18 AM
  2. corrosive primers and suppressors
    By rewd in forum Firearms, Optics and Accessories
    Replies: 6
    Last Post: 20-07-2017, 09:37 PM
  3. Silver
    By Munsey in forum Shotgunning
    Replies: 4
    Last Post: 08-08-2016, 09:22 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!