Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct DPT


User Tag List

+ Reply to Thread
Results 1 to 2 of 2
Like Tree4Likes
  • 4 Post By mimms

Thread: Refinishing a '60s Demoulin SBS (Pic heavy)

  1. #1
    Large Member mimms's Avatar
    Join Date
    Aug 2019
    Location
    Tai Tokerau
    Posts
    269

    Refinishing a '60s Demoulin SBS (Pic heavy)

    Nearly finished this. It came to me rusty as all get-out, most of the finish gone, dings and pits. It was only ever an apprentice's gun and been a beater since, but I have a soft spot for Side-by-sides.
    It was off the face. I machined a new hinge pin, haven't quite got to the fit-up yet but if that doesn't solve it then I'll be looking for someone handy with a TIG to build up the hook.

    Client has put the hurry-up on it. Originally I had intended to re-colour-case the lock and furniture, peacock nitre all the screws and slow rust-blue everything else. But I've had to settle for accelerated-blue the internals and triggers etc. I ended up flame-bluing the screwheads and pin-ends. It's not ideal but pay the piper and call the tune eh.

    I slow-rust blued the barrels (about 3 months, they could do with another 6)

    Stripped the stock with emergel, lifted all the dings and re-cut the checkering. A bit annoyed I didn't take more/better "before" photos because it's come up good.

    More photo's to come as work progresses.
    Attached Images Attached Images        

  2. #2
    Member
    Join Date
    Nov 2014
    Location
    Tasman
    Posts
    785
    Very nice work there!

 

 

Similar Threads

  1. Stock refinishing - hole filling
    By Dama dama in forum Firearms, Optics and Accessories
    Replies: 17
    Last Post: 10-06-2017, 01:31 AM
  2. wooden stock refinishing
    By matagouri in forum Firearms, Optics and Accessories
    Replies: 29
    Last Post: 08-06-2016, 03:51 PM
  3. Refinishing a barrel
    By 7x64 in forum Firearms, Optics and Accessories
    Replies: 3
    Last Post: 25-05-2016, 06:27 PM
  4. refinishing a pitted shotgun barrel
    By Pointer in forum Shotgunning
    Replies: 4
    Last Post: 16-02-2012, 06:28 AM
  5. refinishing a pitted shotgun barrel
    By Pointer in forum Firearms, Optics and Accessories
    Replies: 4
    Last Post: 16-02-2012, 06:28 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!