Thread: Sanblasting cabinet. SCA ?

I have a machinery house benchtop unit. I made rubber seals that sit in holes that I cut on each side wall so I can pass a barrel and action through. My recommendation would be to pull it apart when new and put it back together with a good silicon or other seam sealant adhesive in every panel joint as mine leaks at every join, other than that its a pretty decent unit for the price. We use the same ones at work for specific alloys and blasting grits to avoid cross contamination on sensitive stuff, so I have seen 3 of them last in an industrial environment for 6 or 7 years now.

What are you guys using for satin finish blazing gun parts?
And where from

Originally Posted by akaroa1

What are you guys using for satin finish blazing gun parts?
And where from

Glass beads from The Tool Shed. Regulate the pressure to get different levels of satin on different materials. For example, I find 30-40psi is plenty for a fine satin on aluminum before anodizing. More like 60-70psi for stainless.