@homebrew.357 only correct answer is .25 rimfire
Barrel is absolutely buggered inside and out
Bore pitting is more like craters
Rust build up on outside is very heavy
@homebrew.357 only correct answer is .25 rimfire
Barrel is absolutely buggered inside and out
Bore pitting is more like craters
Rust build up on outside is very heavy
Think I have solved my barrel reaming problem, got a 12mm hand reamer, ground it down to 11.32mm/.446" Dia and the stub end to fit in a holder with oil grove. Have ground back relief on the six flutes . Normally takes me three days to ream and hone a barrel from .443" to .450", now one day and its done, comes out at .449.4" , just a bit of a polish and ready for rifling.
, New reamer on long oil tube rod.
, My tool post grinder attachment.
, Drill in for drive, works a treat.
That looks like a Chevy fan pulley to me!
Nar, Toyota Celica 16 motor, my son built a Lynx kit car, he didn't need that bit so in my comeinhandy box. I don't only use washing machine parts you know.
Homebrew can you contour a couple of barrels now lol ?
That looks like a nice TD you have there Akaroa1, you will be making some thing cool of of that I reckon !
Im about 3/4 the way through sorting through all the brass in my garage and reloading room. I've determined that I have enough 308 brass to last me the rest of my life if I buy a 308. And now, with AR's gone, several lifetimes worth of 223. Im scratching my head at how much 270 brass I have and how I got it. Luckily I have 2x 30/06 so at least I can form. It to something useful.
Hi Scout, no can't profile a barrel, making one octagonal keeps me busy for a week or so. The grinder is for fine finishing only.
A bit more progress today. New king pin set in one side and the disc brake kit filled. I will do the other side tomorrow if the weather stays fine.
Made a scissor blind setup for the 12ft parkercraft today...hope there is a season this year I’m the most prepared I’ve ever been!!
I put all the parts back together and ended up with this
Winchester 1885 takedown .25 rim fire
Rough but complete
Good project
Just ( and a big just ) need to team and install a .22 barrel liner and install a vintage scope if I can find one.
Both the liner and vintage scope will be a challenge in nz
Made myself a body die and a seater for a 6 Norma Dasher.
Bookmarks