Thread: Shotgun-9mm thing

Originally Posted by Toby

Thanks hamsav

Whats the "one" you speak of?

Keuano Reeves. He is the one.

Oh righto, nah no offence taken. I had no idea what you mean by "the one" still have no idea to be honest either

Originally Posted by Toby

Oh righto, nah no offence taken. I had no idea what you mean by "the one" still have no idea to be honest either

6 Inch bull barrel 9mm - For Sale - Auckland Pistol Club

that coat way too much. Hopefully a gunsmith will have a cut off or something laying around

What length do you want?

Toby
I have a 6-8" sako barrel chambered in 308win you can have for this project if...

1 You do your research yourself and find the max pressures of the relevant chamerings(12g and 308 win)
2 Convert pressure over area to to thrust against the action comparatively.
3 Post it up here for everyone to pick holes in.

It would require some work to make it work but nothing a bright young mind with access to a lathe couldn't sort

Alternatively I have the other two bits of 30cal rifled barrel

Is 30cal the same as 9mm? I thought 9mm was bigger

I can't thread on a lathe I'd have to get someone else who can to do it. The teachers cant do it so I've never learnt which sucks

Unless you mean for a .308 insert which would be kick ass for subs aye. Will do the research and post it up here for everyone to pick holes in

PVC pipe any use to you Toby? I have some that I could spare. Ha ha ha ha

Yes a 308 insert,or perhaps a 30 pistol cal.
Do your lathes at work not have a lead screw?


Edit school

Whats a lead screw?

running for cover

No really the school has very basic equipment and the teacher is a wood work teacher. Kinda annoyes me but cant do shit about it

If you have a half decent lathe you'll be able to cut a thread on it. Just get a good lathe book and nut it out, tooling is usually the expensive bit if you don't have any, if you need anything like that done I have a mate here who has a lathe and mill setup at home and could do it.

So the highest of the highest I have found in my data is 11,300PSI-12G and 61,500PSI-.308

I dont have sub sonic loads for .308 so will have to wait until I get on the computer to have a look for that. Also don't know the other bit so will also wait till I get on the pc and google it

Well that will go well!

I hope subs are better. I don't think a full load is bad either as its in its own barrel if thats right?