Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Ammo Direct


User Tag List

+ Reply to Thread
Page 12 of 15 FirstFirst 123456789101112131415 LastLast
Results 166 to 180 of 224
Like Tree72Likes

Thread: Shotgun-9mm thing

  1. #166
    Member Banana's Avatar
    Join Date
    Sep 2013
    Location
    NZ
    Posts
    592
    Quote Originally Posted by Toby View Post

    So my calculation is right by vc and wrong by banana? I got the measurment off chuck hawkes which is different to bananas
    No doubt that I'm off with the case head measurement. I just roughly measured a 12g with crappy plastic ruler and rounded it to the nearest mm. The working should be solid though.

    If you're using 0.6165" as the case head area, seems like you're including the rim of the case in the external case head measurement.
    This would give you an optimistically large amount of force that the action could handle. The pressure is only pushing on the internal case head area, which is much smaller than the exterior case head area if you're including the rim.
    Toby likes this.

  2. #167
    Member
    Join Date
    Nov 2012
    Location
    BOP
    Posts
    21,156
    Weld a bit of 6 mm steel to the face of the block and extend the firing pin!
    Boom, cough,cough,cough

  3. #168
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,967
    Yes also using outside 308 case head measurment giving larger readings of force.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  4. #169
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    So I have tracked down a 9mm barrel off cut just under 4" long. So who here can thread it and drill out and thread the chamber insert for me?

    @veitnamcam @vietnamcam

    Hope one of those is right

  5. #170
    Ejected
    Join Date
    Dec 2012
    Location
    HBC, NORTH of Auckland
    Posts
    5,249
    4"? Must be pretty cold steel?
    AzumitH likes this.

  6. #171
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    Think its just stainless the chamber insert.

  7. #172
    Ejected
    Join Date
    Dec 2012
    Location
    HBC, NORTH of Auckland
    Posts
    5,249
    Quote Originally Posted by Toby View Post
    Think its just stainless the chamber insert.
    Haha whoooooosh!
    puku likes this.

  8. #173
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    I have no idea what you're talking about. But you would have guessed that from the first post

  9. #174
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    Hahaha I think I just got what you were talking about. Only took me a week

    Anyway How much jump can you have between the chamber and rifling? I have the barrel its been thread before so Im thinking just threading the chamber insert and screwing it in like that. Would that work?
    @veitnamcam @tui_man2

  10. #175
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,967
    Send it down I will see what i can sort out.


    Sent from my GT-S5360T using Tapatalk 2
    Toby and BRADS like this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  11. #176
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099

  12. #177
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    Cheers VC, Hope this works well. Need that shell holder for a 9mm now some powder/ projectiles and primers. Gonna load up subs and test to see if it shoots straight out the barrel. if so then a suppressor of some sort is on the cards.



    Note, it's not paint coming off it's just mud.

  13. #178
    Member BRADS's Avatar
    Join Date
    Oct 2012
    Location
    Central Hawkes Bay
    Posts
    9,543
    That is a massive bolt on that bipod mate. Gun looks pretty sweet


    Sent from my iPhone using Tapatalk
    Toby likes this.

  14. #179
    Gone But Not Forgotten Toby's Avatar
    Join Date
    Sep 2012
    Location
    Wouldn't you like to know
    Posts
    11,099
    Yeah, I'm working on that. Just put it in for now cause the factory one is not long enough by about 1mm. If I used a proper stud it'll be fine but I only have one stud that was laying around not being used

  15. #180
    Member
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    461
    You enthused me, and I built up one of these - will try and drop some goats with mine this weekend.
    Also had a lot of fun with mine and making up wax slugs with cheapo skeet rounds !
    Toby likes this.

 

 

Similar Threads

  1. Replies: 92
    Last Post: 09-12-2013, 06:24 PM
  2. 22-204 Ruger sort of thing...
    By Tahr in forum Firearms, Optics and Accessories
    Replies: 6
    Last Post: 30-08-2013, 11:49 AM
  3. List of thing to do to my hunting wagon...
    By Wildman in forum Outdoor Transport
    Replies: 66
    Last Post: 02-06-2013, 10:32 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!