If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Well 3 steps forward and 2 steps back had some issues at the range today with what seemed like inconsistent grouping
Had me totally stumped till I got home and went over the rifle.
It never occurred to me that the old finnlight barrel and the new Tikka barrel might be slightly different in contour and diameter but clearly they are as part of my investigation revealed that the new barrel is touching the stock pretty muck most of the way from the action to the tip of the fore, it also looks like the taper is slightly different as it looks like it's been rubbing on a couple spots.
This issue was likely less pronounced when I was shooting prone off the ground as I load up the bipod a bit, however shooting off the bench at the handloaders range it's hard to load the bipod up as it just slides forward.
Anyway, will drop the rifle back to Zac and get him to re bed it and make sure the barrel is free floated, then I will load a small charge ladder at the 90thou off the lands seating depth and see if things become gravy once again
Bugger. Oh well, Ive still got that pkt of Norma 270 wsm ammo here to get you started for when the 270wsm barrel goes back on
Bugger. Oh well, Ive still got that pkt of Norma 270 wsm ammo here to get you started for when the 270wsm barrel goes back on
I am not that quick to admit defeat whilst frustrating I am learning a lot. Very close to buying factory ammo and seeing how that shoots but have a few more things to tidy up before it gets to that....
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks