The sooper dooper pig 300wsm project thread

[Gibo]

Now redo the ladder all at 90thou

[BRADS]

Yeah and nah.
Some factory ammo can shoot tiny little groups and still have speeds all over the show.
I see the point if trying to develop a load for LR ELR shooting but even a 50fps spread would make little to no difference in a hunting rifle.

Bang on Cam

Sent from my SM-S906E using Tapatalk

[dannyb]

Now redo the ladder all at 90thou

I'm more than happy with the velocity at 62gn knowing I'm well away from pressure

[dannyb]

Bang on Cam

Sent from my SM-S906E using Tapatalk

I totally agree have seen it myself, I'll still stick with what I'm doing as clearly I have achieved the results I was aiming for
If there was a magic way to develop a load without all the dark arts and testing I'd be all for it but till then my way works for me

[Gibo]

I'm more than happy with the velocity at 62gn knowing I'm well away from pressure

You’ll be back

[Micky Duck]

I totally agree have seen it myself, I'll still stick with what I'm doing as clearly I have achieved the results I was aiming for
If there was a magic way to develop a load without all the dark arts and testing I'd be all for it but till then my way works for me

biting.....my....tongue........

[Ryan_Songhurst]

[dannyb]

Attachment 198409

Are you runjing it in your Forbes or Kimber

[BRADS]

I totally agree have seen it myself, I'll still stick with what I'm doing as clearly I have achieved the results I was aiming for
If there was a magic way to develop a load without all the dark arts and testing I'd be all for it but till then my way works for me

Oh 100% no one can say your not dedicated mate ! You obviously enjoy it good on ya.


Sent from my SM-S906E using Tapatalk

[GWH]

Now redo the ladder all at 90thou

Yep, should sort out the seating depth it likes first, using a mild powder charge.

[dannyb]

Yep, should sort out the seating depth it likes first, using a mild powder charge.

I get what you all are saying....and probably will happen one day but pending range session tomorrow over the labradar I'll be leaving well enough alone until I can get more projectiles.

[Pop Shot]

Good effort, but you should have just got a Tikka and loaded to mag length eh.

Now to shoot some creatures.

[dannyb]

Good effort, but you should have just got a Tikka and just loaded to mag length ��

I have always loaded to max mag length in my a7 for starting point and never needed to adjust seating depth, funy this didn't like mag length at all. I've always done charge weight ladders first when working up aload but maybe @GWH has a point maybe I should be doing seating depth first over a mild charge

[Micky Duck]

I have always loaded to max mag length in my a7 for starting point and never needed to adjust seating depth, funy this didn't like mag length at all. I've always done charge weight ladders first when working up aload but maybe @GWH has a point maybe I should be doing seating depth first over a mild charge

geeeze mate...next you will be saying there is merit in using a factory load rifle shoots ok with to set up your seating dies !!!!!!!!!
careful...its a slippery slope,you will be kinking your scope around to 45 degrees if your not careful LMFAO

[dannyb]

geeeze mate...next you will be saying there is merit in using a factory load rifle shoots ok with to set up your seating dies !!!!!!!!!

Have done that in the past when replicating a known factory load that shoots well in that rifle
Couldn't do that in this circumstance as never shot any factory ammo in this rifle. And Targex pills don't come loaded in any factory ammo