Thread: What to do with my Omark ?

Na I've seen it before where people take brass and machine the rim smaller to suit the bolt face. Ends up looking funny a bit like the 450 bushmaster where the rim is much smaller than the base.no good for a controlled feed but ok for push feed or single shot.you have to turn each piece of brass but you can grind a cutter to the correct shape and its fast enough just dont throw your brass away!

Originally Posted by Walker

Chop the barrel 40mm from the reciever, back bore and thread for a fast twist 6.5 barrell chambered in 6.5/284 or 6.5-06 ackley. That will get waaaay out there.

It already sports a Nielsen adapter, and if you read the initial post, part of the question was 30 cal, I'd like to keep the existing barrel

30-06AI it is then.

This is going to be epic. Love it!

I have one in 30-06 here already you can have for $350

that's a mean deal scopes probably worth that much

Got about 5 others in .308 and some actions too if anyone wants to join the fan club. Good cheap long range rigs that shoot just as well as any modern rifle

Do something new New Zealand.

I'll repeat myself.

425 westley richards/30 cal.
Neck down and go.

Will fit your existing bolt face.
Around 110gr capacity.

Even mildly loaded that should boot some bullets up the arse pretty good.

What have you got to lose?