Thread: Benelli Vinci rust issues

Rain, you take it out in the rain!!!!!!!!!!!!! Thats the problem:0

Originally Posted by jakewire

Moral of the story.
Never buy an ugly gun.

That wasn't their only issue, jamming sons of bitches.

i brought mine off a guy who reconed it jammed all the time, iv put a shit loads of rounds through it and its never even thought about jamming on me, I recon it must hav to do with how solid he had his shoulder with the inertia system,

I mean how not solid his shoulder was,

Originally Posted by Callum

i brought mine off a guy who reconed it jammed all the time, iv put a shit loads of rounds through it and its never even thought about jamming on me, I recon it must hav to do with how solid he had his shoulder with the inertia system,

I would say your spot on.
The inertia system can be mucked up by poor mounting. They will cycle best firm in the shoulder.


Sent from my iPhone using Tapatalk 2

Does the Vinci have the same coating on the barrel as the m2? Ie it's quite a thick coat, rather than blueing

Wipe the gun down with a paper towel then give it a good spray with Innox or CRC marine before you even put it in the bag to take it home , then clean and oil it before it goes away in the safe as the safe can often provide the best conditions for rust promotion around , never store the gun in a bag in the safe , I have seen many guns with the bag fabric weave rusted into the metal . If you must use a bag to protect the stock , make sure the gun is clean and dry and use a silicon treated sack up sleeve available from Reloaders Supplies . Check your stored firearms on a regular basis if you live in a humid area like Auckland .