Thread: Calibers

Originally Posted by 7mmsaum

The SRUM was 100 thou short.

Gregs 7mm stumpy is shorter rum to 2.5inch case. This is similar but different

As 7mm saum list above there are heaps to choose from all have different ups and downs just like this but this overs them all well while down been bit of brass prep but as is the 7mm 375 ruger its just as much effort sizing it down as this with this been cheaper brass and cheaper better dies

Sent from my GT-I9300T using Tapatalk 2

The 7mm wingman case has changed slightly now it's a neck down, form an go. Will post up more information on it shortly

This just a little teaser since we now have nice brass

Sent from my GT-I9300T using Tapatalk 2

Is there such thing as 6.5 wingman?

Originally Posted by Toby

Is there such thing as 6.5 wingman?

Could be easy enough but would like barrels

Sent from my GT-I9300T using Tapatalk 2

Originally Posted by tui_man2

Could be easy enough but would like barrels for breakfast

Sent from my GT-I9300T using Tapatalk 2

.

Originally Posted by kiwijames

.

Could take shares in me haha.

Sent from my GT-I9300T using Tapatalk 2

Originally Posted by Tussock

You will fit right in Toby, you just wildcatted a barely completed wildcat

Hands down the funniest statement ever

Originally Posted by Tussock

You will fit right in Toby, you just wildcatted a barely completed wildcat

Its ok wee timmy one day someone will like you. Other one has formed brass etc. But you know everything before it happens I keep forgetting that.

Sent from my GT-I9300T using Tapatalk 2

Originally Posted by tui_man2

Its ok wee timmy one day someone will like you. Other one has formed brass etc. But you know everything before it happens I keep forgetting that.

Sent from my GT-I9300T using Tapatalk 2

And quite possibly you'll never learn...

Originally Posted by Toby

Is there such thing as 6.5 wingman?

6.5wing man by a 7mm rem mag
Loaded with a 130gr norma Dimondline


Sent from my GT-I9300T using Tapatalk 2

hi Abe swift siccrocco 2 130gr.571bc .0266sd would be a mean round I would think

Originally Posted by tui_man2

6.5wing man by a 7mm rem mag
Loaded with a 130gr norma Dimondline


Sent from my GT-I9300T using Tapatalk 2

Your using 300 Dakota brass ??

My preference is for the 300 Jarrett brass.

No not the 300 Dakota but a new case on the market they landed in NZ today. the Dakota case has a bigger base than the Rum case

Originally Posted by 45SOUTH

No not the 300 Dakota but a new case on the market they landed in NZ today. the Dakota case has a bigger base than the Rum case

Thall do quinten thatll do!!! lol

[QUOTE=45SOUTH;105803]No not the 300 Dakota but a new case on the market they landed in NZ today. the Dakota case has a bigger base than the Rum case[/QUOTE

The 300 dakota base and body dia i reload for is .545.

Is this new brass easier to get than a standard old 7 mm RUM?
And whats the brass cost please.

I don't use a 162 a- max past 3250 fps in a light unbraked rifle, when i find im going to hunt in an area that requires more power, in turn requiring a brake, i reach for the edge.

Now that we can make 338 edge rifles under 8 pounds all up, with the best brakes on the planet, i use them.