Thread: Calibers

Originally Posted by R93

A few possibilities with that as a parent case mr Abe.
I have decided to be timid and go .280AI
It will be easier as well. I doubt I would get a mag for the 93 to hold that case.


Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!

You most definitely will get a mag for the case (ay Abe)

Originally Posted by kiwijames

You most definitely will get a mag for the case (ay Abe)

I will also have to buy a new bolt head.
Cheaper and safer to go the .280AI
It will handle anything I would be capable of.




Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!

will need the mag bolt face an the mag for the blaser.
will pm you dave

Originally Posted by tui_man2

will need the mag bolt face an the mag for the blaser.
will pm you dave

For what shag? I am going with the .280 not that big fat thing.

Originally Posted by R93

For what shag? I am going with the .280 not that big fat thing.

I know

Originally Posted by tui_man2

I know

You reckon I wussed out eh? I fired a few through sneeze's cooper and liked it.... a lot.

Whats the wingman got over the 7mm practical? Speed wise. Im picking the later would be easier to setup , simple ream and shoot job isnt it? Also what do you think of a short barreld 284 like 18 inches how quick would that get the amax going. #randomdumbquestions.

Sent from my GT-I9300 using Tapatalk 2

Originally Posted by 7mmsaum

How much for a packet of brass Quentin ???

How much for a packet of brass Quentin ?

Originally Posted by 7mmsaum

How much for a packet of brass Quentin ?

It's a secret you will never no

Originally Posted by Tussock

While the secret squirrel 7mm stuff must be fun, unless its doing 5500ft/sec with a 180gr VLD, its probably been done already

Not been done . . . . All brass has been taken that come in :p

Sent from my GT-I9300T using Tapatalk 2

Originally Posted by CreepingDeath

Whats the wingman got over the 7mm practical? Speed wise. Im picking the later would be easier to setup , simple ream and shoot job isnt it? Also what do you think of a short barreld 284 like 18 inches how quick would that get the amax going. #randomdumbquestions.

Sent from my GT-I9300 using Tapatalk 2

Well be much of a much maybe little bit on it? And shorter nicer case. The wingman would be as much work if not less as the practical since it's got imp shoulder?

I'd think it would go down to around the 7mm08 speeds at a guess? but not done it to know mate sorry

Sent from my GT-I9300T using Tapatalk 2

The standard 7mm RUM is no work at all and with a properly designed lead/throat and barrel type/length can spit the 180g Berger out at 3400+ fps, if you want more barrel life or less recoil just slow it down, 95 grains of 2225 will give you 3225 fps or thereabouts with a 162 grainer, and you will have what you want.

The Berger 180g Elite Hunter projectile is extremely useful around those velocities, even so the 26 inch 338 Edge with a 300g Elite Hunter projectile is streets above it in barrel life, internal and external ballistics uniformity and terminal ballistics performance.

The Edge and RUM are childs play to make ammo for.

Originally Posted by 7mmsaum

The standard 7mm RUM is no work at all and with a properly designed lead/throat and barrel type/length can spit the 180g Berger out at 3400+ fps, if you want more barrel life or less recoil just slow it down, 95 grains of 2225 will give you 3225 fps or thereabouts with a 162 grainer, and you will have what you want.

The Berger 180g Elite Hunter projectile is extremely useful around those velocities, even so the 26 inch 338 Edge with a 300g Elite Hunter projectile is streets above it in barrel life, internal and external ballistics uniformity and terminal ballistics performance.

The Edge and RUM are childs play to make ammo for.

Load data? Huge long tube and massive pressure load cases wouldn't last long?

Sent from my GT-I9300T using Tapatalk 2

Are you asking me or assuming and telling me? , you put a question mark on a statement.

Originally Posted by 7mmsaum

Are you asking me or assuming and telling me? , you put a question mark on a statement.

Asking to see your load for that speed. . ,

http://adi-powders.com.au/handloader...n+Ultra+Magnum

Nothing close to that I know adi way under sometimes but 350feet faster?
Sent from my GT-I9300T using Tapatalk 2